Configuration

This page describes the available configuration options in Stryker's core package. Please keep in mind that your plugins might also need configuration, see your plugin's configuration page for that.

All configuration options can either be set via the command line or via a config file.

The files and mutate options (and some others) support globbing expressions using node glob. See the config file documentation for more information.

allowConsoleColors [boolean]

Default: true
Command line: --allowConsoleColors true
Config file: "allowConsoleColors": true

The allowConsoleColors value indicates whether Stryker should use colors in console.

buildCommand [string]

Default: undefined
Command line: [-b|--buildCommand] "npm run build"
Config file: "buildCommand": 'npm run build'

Configure a build command to run after mutating the code, but before mutants are tested. This is generally used to transpile your code before testing. Only configure this if your test runner doesn't take care of this already and you're not using just-in-time transpiler like babel/register or ts-node.

cleanTempDir [boolean]

Default: true
Command line: --cleanTempDir false
Config file: "cleanTempDir": false

Choose whether or not to clean the temp dir (which is ".stryker-tmp" inside the current working directory by default) after a successful run. The temp dir will never be removed when the run failed for some reason (for debugging purposes).

concurrency [number]

Default: cpuCoreCount <= 4? cpuCoreCount : cpuCoreCount - 1
Command line: --concurrency 4
Config file: "concurrency": 4

Set the concurrency of workers. Stryker will always run checkers and test runners in parallel by creating worker processes (note, not worker_threads). This defaults to n-1 where n is the number of logical CPU cores available on your machine, unless n <= 4, in that case it uses n. This is a sane default for most use cases.

commandRunner [object]

Default: { command: 'npm test' }
Command line: none
Config file: "commandRunner": { "command": "npm run mocha" }

With commandRunner, you can specify the command to execute for running tests.

coverageAnalysis [string]

Default: off
Command line: --coverageAnalysis perTest
Config file: "coverageAnalysis": "perTest"

With coverageAnalysis you specify which coverage analysis strategy you want to use.

Stryker can analyse code coverage results. This can potentially speed up mutation testing a lot, as only the tests covering a particular mutation are tested for each mutant. This does not influence the resulting mutation testing score. It only improves performance.

The possible values are:

  • off: Stryker will not determine the code covered by tests during the initial test run phase. All tests will be executed for each mutant during the mutation testing phase.

  • all: Stryker will determine the code covered by all tests during the initial test run phase. Only mutants actually covered by your test suite are tested during the mutation testing phase. This setting requires your test runner to be able to report the code coverage back to Stryker. Currently, only the stryker-mocha-runner and the stryker-karma-runner do this.

  • perTest: Stryker will determine the code covered by your test per executed test during the initial test run phase. Only mutants actually covered by your test suite are tested during the mutation testing phase. Only the tests that cover a particular mutant are tested for each one. This requires your tests to be able to run independently of each other and in random order. before and after each test, as well as test filtering. Currently all test runner plugins, except for @stryker-mutator/jest-runner) support this feature.

dashboard [DashboardOptions]

Default: { baseUrl: 'https://dashboard.stryker-mutator.io/api/reports', reportType: 'mutationScore' }
Command line:

  • --dashboard.project github.com/my-org/my-project --dashboard.version branch-or-tag
  • --dashboard.module my-module
  • --dashboard.baseUrl https://dashboard.stryker-mutator.io/api/reports
  • --dashboard.reportType full

Config file:

{
"dasboard": {
"project": "github.com/my-org/my-project",
"version": "branch-or-tag",
"module": "my-module",
"baseUrl": "https://dashboard.stryker-mutator.io/api/reports",
"reportType": "full"
}
}

Settings for the dashboard reporter. See the dashboard documentation for more info.

disableTypeChecks [false | string]

Default: "{test,src,lib}/**/*.{js,ts,jsx,tsx,html,vue}"
Command: none
Config file: "disableTypeChecks": false

Configure a pattern that matches the files of which type checking has to be disabled. This is needed because Stryker will create (typescript) type errors when inserting the mutants in your code. Stryker disables type checking by inserting // @ts-nocheck atop those files and removing other // @ts-xxx directives (so they won't interfere with @ts-nocheck). The default setting allows these directives to be stripped from all JavaScript and friend files in lib, src and test directories. You can specify a different glob expression or set it to false to completely disable this behavior.

dryRunTimeoutMinutes [number]

Default: 5
Command line: --dryRunTimeoutMinutes 5
Config file: "dryRunTimeoutMinutes": 5

Use this option to configure an absolute timeout for the initial test run. Since it can take a while we use minutes as time unit.

fileLogLevel [string]

Default: off
Command line: --fileLogLevel info
Config file: "fileLogLevel": "info"

Set the log level that Stryker uses to write to the "stryker.log" file. Possible values: off, fatal, error, warn, info, debug and trace

files [string[]]

Default: result of git ls-files --others --exclude-standard --cached --exclude .stryker-tmp
Command line: [--files|-f] src/**/*.js,a.js,test/**/*.js
Config file: "files": ["src/**/*.js", "!src/**/index.js", "test/**/*.js"]

With files, you can choose which files should be included in your test runner sandbox. This is normally not needed as it defaults to all files not ignored by git. Try it out yourself with this command: git ls-files --others --exclude-standard --cached --exclude .stryker-tmp.

If you do need to override files (for example: when your project does not live in a git repository), you can override the files here.

When using the command line, the list can only contain a comma separated list of globbing expressions. When using the config file you can provide an array with strings

You can ignore files by adding an exclamation mark (!) at the start of an expression.

logLevel [string]

Default: info
Command line: --logLevel info
Config file: "logLevel": "info"

Set the log level that Stryker uses to write to the console. Possible values: off, fatal, error, warn, info, debug and trace

Note: Test runners are run as child processes of the Stryker Node process. All output (stdout) of the testRunner is logged as trace. Thus, to see logging output from the test runner set the logLevel to all or trace.

maxConcurrentTestRunners (DEPRECATED)

DEPRECATED. Please use concurrency instead.

mutate [string[]]

Default: ['{src,lib}/**/*.js?(x)', '!{src,lib}/**/__tests__/**/*.js?(x)', '!{src,lib}/**/?(*.)+(spec|test).js?(x)', '!{src,lib}/**/*+(Spec|Test).js?(x)']
Command line: [--mutate|-m] src/**/*.js,a.js
Config file: "mutate": ["src/**/*.js", "a.js"]

With mutate you configure the subset of files to use for mutation testing. Generally speaking, these should be your own source files. This is optional, as you can choose to not mutate any files at all and perform a dry-run (running only your tests without mutating).

mutator [MutatorDescriptor]

Default: {}
Command line: none
Config file: "mutator": { "plugins": ["classProperties"], "excludedMutations": ["StringLiteral"] }

  • plugins: allows you to override the default babel plugins to use for JavaScript files. By default, Stryker uses a default list of babel plugins to parse your JS file. It also loads any plugins or presets you might have configured yourself with .babelrc or babel.config.js files. In the rare situation where the plugins Stryker loads conflict with your own local plugins (for example, when using the decorators and decorators-legacy plugins together), you can override the plugins here to [].
  • excludedMutations: allow you to specify a list of mutator names to be excluded (ignored) from the test run.

Note: prior to Stryker version 4, the mutator also needed a name (or be defined as string). This is removed in version 4. Stryker now supports mutating of JavaScript and friend files out of the box, without the need for a mutator plugin.

plugins [string[]]

Default: ['@stryker-mutator/*']
Command line: --plugins @stryker-mutator/jasmine-framework,@stryker-mutator/karma-runner
Config file: "plugins": ["@stryker-mutator/jasmine-framework", "@stryker-mutator/karma-runner"]

With plugins, you can add additional Node modules for Stryker to load (or require). By default, all node_modules starting with @stryker-mutator/* will be loaded, so you would normally not need to specify this option. These modules should be installed right next to stryker. For a current list of plugins, you can consult npm or use one of the officially supported plugins.

reporters [string[]]

Default: ['clear-text', 'progress', 'html']
Command line: --reporters clear-text,progress,dots,dashboard,html,json
Config file: "reporters": ["clear-text", "progress", "dots", "dashboard", "html", "json"]

With reporters, you can set the reporters for Stryker to use. These reporters can be used out of the box: html, json, progress, clear-text, dots, dashboard and event-recorder. By default, clear-text, progress, html are active if no reporters are configured. See reporter plugins for a full description of each reporter.

The html reporter allows you to specify an output folder. This defaults to reports/mutation/html. The config for your config file is: htmlReporter: { baseDir: 'mypath/reports/stryker' }

The json reporter allows specifying an output file name (may also contain a path). The config for your config file is: jsonReporter: { fileName: 'mypath/reports/mutation.json' }

The clear-text reporter supports three additional config options:

  • allowColor to use cyan and yellow in printing source file names and positions. This defaults to true, so specify as clearTextReporter: { allowColor: false }, to disable if you must.
  • logTests to log the names of unit tests that were run to allow mutants. By default, only the first three are logged. The config for your config file is: clearTextReporter: { logTests: true },
  • maxTestsToLog to show more tests that were executed to kill a mutant when logTests is true. The config for your config file is: clearTextReporter: { logTests: true, maxTestsToLog: 7 },

The dashboard reporter sends a report to https://dashboard.stryker-mutator.io, enabling you to add a mutation score badge to your readme, as well as hosting your html report on the dashboard. It uses the dashboard.* configuration options.

symlinkNodeModules [boolean]

Default: true
Command line: none
Config file: "symlinkNodeModules": true

The symlinkNodeModules value indicates whether Stryker should create a symbolic link to your current node_modules directory in the sandbox directories. This makes running your tests by Stryker behave more like your would run the tests yourself in your project directory. Only disable this setting if you really know what you are doing.

For example, Jest expects any plugins to be located at "./node_modules/..." in the Sandbox directory. Another example can be running karma tests where you specify files from the 'node_modules/angular/...'. Without symlinking the node_modules directory this would not be possible.

Stryker will look for the node_modules directory to use in the current basePath (or current working directory) and its parent directories.

tempDirName [string]

Default: '.stryker-tmp'
Command line: --tempDirName .stryker-tmp
Config file: "tempDirName": '.stryker-tmp'

Choose a different temp dir that Stryker uses for mutation testing. This directory will contain copies of your source code during a mutation test run. It will be created if it not exists and is entirely deleted after a successful run, so change this with caution.

It is advised to use a directory inside the directory that holds your repository. This way node_modules are resolved as expected. Be sure to not check-in your chosen temp directory in your .gitignore file.

testFramework (DEPRECATED)

Note: Use of "testFramework" is no longer needed. You can remove it from your configuration. Your test runner plugin now handles its own test framework integration

testRunner [string]

Default: 'command'
Command line: --testRunner karma
Config file: "testRunner": "karma"

With testRunner you specify the test runner that Stryker uses to run your tests. The default value is command. The command runner runs a configurable bash/cmd command and bases the result on the exit code of that program (0 for success, otherwise failed). You can configure this command via the config file using the commandRunner: { command: 'npm run mocha' }. It uses npm test as the command by default.

The command test runner can be made to work in any use case, but comes with a performance penalty, as Stryker cannot do any optimizations and just runs all tests for all mutants. If possible, you should try to use one of the test runner plugins that hook into your test runner of choice. For example: install and use the @stryker-mutator/karma-runner to use karma as a test runner.

testRunnerNodeArgs [string[]]

Default: []
Command line: --testRunnerNodeArgs "--inspect-brk --cpu-prof"
Config file: "testRunnerNodeArgs": ["--inspect-brk", "--cpu-prof"]

Configure arguments to be passed as exec arguments to the test runner child process. For example, running Stryker with --timeoutMS 9999999 --concurrency 1 --testRunnerNodeArgs "--inspect-brk" will allow you to debug the test runner child process. See execArgv of child_process.fork.

thresholds [object]

Default: { high: 80, low: 60, break: null }
Command line: none
Config file: "thresholds": { "high": 80, "low": 60, "break": null }

Description Specify the thresholds for mutation score.

  • mutation score >= high: Awesome! Reporters should color this green and happy.
  • high > mutation score >= low: Warning! Reporters should color this orange/yellow. Watch yourself!
  • mutation score < low: Danger! Reporters should color this in red. You're in danger!
  • mutation score < break: Error! Stryker will exit with exit code 1, indicating a build failure. No consequence for reporters, though.

It is not allowed to only supply one value of the values (it's all or nothing). However, high and low values can be the same, making sure colors are either red or green. Set break to null (default) to never let your build fail.

timeoutFactor [number]

Default: 1.5
Command line: --timeoutFactor 1.5
Config file: "timeoutFactor": 1.5

See Timeout in milliseconds.

timeoutMS [number]

Default: 5000
Command line: --timeoutMS 5000
Config file: "timeoutMS": 5000

When Stryker is mutating code, it cannot determine indefinitely whether a code mutation results in an infinite loop (see Halting problem). In order to battle infinite loops, a test run gets killed after a certain period of time. This period is configurable with two settings: timeoutMS and timeoutFactor. To calculate the actual timeout in milliseconds the, following formula is used:

timeoutForTestRunMs = netTimeMs * timeoutFactor + timeoutMS + overheadMs

Both netTimeMs and overheadMs are calculated during the initial test run. They are logged on info level. For example when overheadMs is 92 and netTimeMs is 5: Initial test run succeeded. Ran 6 tests in 4 seconds (net 5 ms, overhead 92 ms).

With timeoutFactor you can configure the allowed deviation relative to the time of a normal test run. Tweak this if you notice that mutants are prone to creating slower code, but not infinite loops. timeoutMS lets you configure an absolute deviation. Use it, if you run Stryker on a busy machine and you need to wait longer to make sure that the code indeed entered an infinite loop.

transpilers (DEPRECATED)

Note: Support for "transpilers" plugins is removed since Stryker 4. You can now configure your own buildCommand